 |
 |
 |
Python Tutorial |  |
 |
This chapter describes some things you've learned about already in more detail, and adds some new things as well.
The list data type has some more methods. Here are all of the methods of list objects:
| x) |
a[len(a):] = [x].
| L) |
a[len(a):] = L.
| i, x) |
a.insert(0, x)
inserts at the front of the list, and a.insert(len(a), x)
is equivalent to a.append(x).
| x) |
| [i]) |
a.pop() returns the last item in the
list. The item is also removed from the list. (The square brackets
around the i in the method signature denote that the parameter
is optional, not that you should type square brackets at that
position. You will see this notation frequently in the
Python Library Reference.)
| x) |
| x) |
| ) |
| ) |
An example that uses most of the list methods:
>>> a = [66.6, 333, 333, 1, 1234.5]
>>> print a.count(333), a.count(66.6), a.count('x')
2 1 0
>>> a.insert(2, -1)
>>> a.append(333)
>>> a
[66.6, 333, -1, 333, 1, 1234.5, 333]
>>> a.index(333)
1
>>> a.remove(333)
>>> a
[66.6, -1, 333, 1, 1234.5, 333]
>>> a.reverse()
>>> a
[333, 1234.5, 1, 333, -1, 66.6]
>>> a.sort()
>>> a
[-1, 1, 66.6, 333, 333, 1234.5]
The list methods make it very easy to use a list as a stack, where the last element added is the first element retrieved (``last-in, first-out''). To add an item to the top of the stack, use append(). To retrieve an item from the top of the stack, use pop() without an explicit index. For example:
>>> stack = [3, 4, 5] >>> stack.append(6) >>> stack.append(7) >>> stack [3, 4, 5, 6, 7] >>> stack.pop() 7 >>> stack [3, 4, 5, 6] >>> stack.pop() 6 >>> stack.pop() 5 >>> stack [3, 4]
You can also use a list conveniently as a queue, where the first
element added is the first element retrieved (``first-in,
first-out''). To add an item to the back of the queue, use
append(). To retrieve an item from the front of the queue,
use pop() with 0 as the index. For example:
>>> queue = ["Eric", "John", "Michael"]
>>> queue.append("Terry") # Terry arrives
>>> queue.append("Graham") # Graham arrives
>>> queue.pop(0)
'Eric'
>>> queue.pop(0)
'John'
>>> queue
['Michael', 'Terry', 'Graham']
There are three built-in functions that are very useful when used with lists: filter(), map(), and reduce().
"filter(function, sequence)" returns a sequence (of
the same type, if possible) consisting of those items from the
sequence for which function(item) is true. For
example, to compute some primes:
>>> def f(x): return x % 2 != 0 and x % 3 != 0 ... >>> filter(f, range(2, 25)) [5, 7, 11, 13, 17, 19, 23]
"map(function, sequence)" calls
function(item) for each of the sequence's items and
returns a list of the return values. For example, to compute some
cubes:
>>> def cube(x): return x*x*x ... >>> map(cube, range(1, 11)) [1, 8, 27, 64, 125, 216, 343, 512, 729, 1000]
More than one sequence may be passed; the function must then have as
many arguments as there are sequences and is called with the
corresponding item from each sequence (or None if some sequence
is shorter than another). If None is passed for the function,
a function returning its argument(s) is substituted.
Combining these two special cases, we see that "map(None, list1, list2)" is a convenient way of turning a pair of lists into a list of pairs. For example:
>>> seq = range(8) >>> def square(x): return x*x ... >>> map(None, seq, map(square, seq)) [(0, 0), (1, 1), (2, 4), (3, 9), (4, 16), (5, 25), (6, 36), (7, 49)]
"reduce(func, sequence)" returns a single value constructed by calling the binary function func on the first two items of the sequence, then on the result and the next item, and so on. For example, to compute the sum of the numbers 1 through 10:
>>> def add(x,y): return x+y ... >>> reduce(add, range(1, 11)) 55
If there's only one item in the sequence, its value is returned; if the sequence is empty, an exception is raised.
A third argument can be passed to indicate the starting value. In this case the starting value is returned for an empty sequence, and the function is first applied to the starting value and the first sequence item, then to the result and the next item, and so on. For example,
>>> def sum(seq): ... def add(x,y): return x+y ... return reduce(add, seq, 0) ... >>> sum(range(1, 11)) 55 >>> sum([]) 0
Don't use this example's definition of sum(): since summing
numbers is such a common need, a built-in function
sum(sequence) is already provided, and works exactly like
this.
New in version 2.3.
List comprehensions provide a concise way to create lists without resorting to use of map(), filter() and/or lambda. The resulting list definition tends often to be clearer than lists built using those constructs. Each list comprehension consists of an expression followed by a for clause, then zero or more for or if clauses. The result will be a list resulting from evaluating the expression in the context of the for and if clauses which follow it. If the expression would evaluate to a tuple, it must be parenthesized.
>>> freshfruit = [' banana', ' loganberry ', 'passion fruit ']
>>> [weapon.strip() for weapon in freshfruit]
['banana', 'loganberry', 'passion fruit']
>>> vec = [2, 4, 6]
>>> [3*x for x in vec]
[6, 12, 18]
>>> [3*x for x in vec if x > 3]
[12, 18]
>>> [3*x for x in vec if x < 2]
[]
>>> [[x,x**2] for x in vec]
[[2, 4], [4, 16], [6, 36]]
>>> [x, x**2 for x in vec] # error - parens required for tuples
File "<stdin>", line 1, in ?
[x, x**2 for x in vec]
^
SyntaxError: invalid syntax
>>> [(x, x**2) for x in vec]
[(2, 4), (4, 16), (6, 36)]
>>> vec1 = [2, 4, 6]
>>> vec2 = [4, 3, -9]
>>> [x*y for x in vec1 for y in vec2]
[8, 6, -18, 16, 12, -36, 24, 18, -54]
>>> [x+y for x in vec1 for y in vec2]
[6, 5, -7, 8, 7, -5, 10, 9, -3]
>>> [vec1[i]*vec2[i] for i in range(len(vec1))]
[8, 12, -54]
To make list comprehensions match the behavior of for loops, assignments to the loop variable remain visible outside of the comprehension:
>>> x = 100 # this gets overwritten >>> [x**3 for x in range(5)] [0, 1, 8, 27, 64] >>> x # the final value for range(5) 4
There is a way to remove an item from a list given its index instead of its value: the del statement. This can also be used to remove slices from a list (which we did earlier by assignment of an empty list to the slice). For example:
>>> a = [-1, 1, 66.6, 333, 333, 1234.5] >>> del a[0] >>> a [1, 66.6, 333, 333, 1234.5] >>> del a[2:4] >>> a [1, 66.6, 1234.5]
del can also be used to delete entire variables:
>>> del a
Referencing the name a hereafter is an error (at least until
another value is assigned to it). We'll find other uses for
del later.
We saw that lists and strings have many common properties, such as indexing and slicing operations. They are two examples of sequence data types. Since Python is an evolving language, other sequence data types may be added. There is also another standard sequence data type: the tuple.
A tuple consists of a number of values separated by commas, for instance:
>>> t = 12345, 54321, 'hello!' >>> t[0] 12345 >>> t (12345, 54321, 'hello!') >>> # Tuples may be nested: ... u = t, (1, 2, 3, 4, 5) >>> u ((12345, 54321, 'hello!'), (1, 2, 3, 4, 5))
As you see, on output tuples are alway enclosed in parentheses, so that nested tuples are interpreted correctly; they may be input with or without surrounding parentheses, although often parentheses are necessary anyway (if the tuple is part of a larger expression).
Tuples have many uses. For example: (x, y) coordinate pairs, employee records from a database, etc. Tuples, like strings, are immutable: it is not possible to assign to the individual items of a tuple (you can simulate much of the same effect with slicing and concatenation, though). It is also possible to create tuples which contain mutable objects, such as lists.
A special problem is the construction of tuples containing 0 or 1 items: the syntax has some extra quirks to accommodate these. Empty tuples are constructed by an empty pair of parentheses; a tuple with one item is constructed by following a value with a comma (it is not sufficient to enclose a single value in parentheses). Ugly, but effective. For example:
>>> empty = ()
>>> singleton = 'hello', # <-- note trailing comma
>>> len(empty)
0
>>> len(singleton)
1
>>> singleton
('hello',)
The statement t = 12345, 54321, 'hello!' is an example of
tuple packing: the values 12345, 54321 and
'hello!' are packed together in a tuple. The reverse operation
is also possible:
>>> x, y, z = t
This is called, appropriately enough, sequence unpacking. Sequence unpacking requires that the list of variables on the left have the same number of elements as the length of the sequence. Note that multiple assignment is really just a combination of tuple packing and sequence unpacking!
There is a small bit of asymmetry here: packing multiple values always creates a tuple, and unpacking works for any sequence.
Another useful data type built into Python is the dictionary. Dictionaries are sometimes found in other languages as ``associative memories'' or ``associative arrays''. Unlike sequences, which are indexed by a range of numbers, dictionaries are indexed by keys, which can be any immutable type; strings and numbers can always be keys. Tuples can be used as keys if they contain only strings, numbers, or tuples; if a tuple contains any mutable object either directly or indirectly, it cannot be used as a key. You can't use lists as keys, since lists can be modified in place using their append() and extend() methods, as well as slice and indexed assignments.
It is best to think of a dictionary as an unordered set of
key: value pairs, with the requirement that the keys are unique
(within one dictionary).
A pair of braces creates an empty dictionary: {}.
Placing a comma-separated list of key:value pairs within the
braces adds initial key:value pairs to the dictionary; this is also the
way dictionaries are written on output.
The main operations on a dictionary are storing a value with some key
and extracting the value given the key. It is also possible to delete
a key:value pair
with del.
If you store using a key that is already in use, the old value
associated with that key is forgotten. It is an error to extract a
value using a non-existent key.
The keys() method of a dictionary object returns a list of all
the keys used in the dictionary, in random order (if you want it
sorted, just apply the sort() method to the list of keys). To
check whether a single key is in the dictionary, use the
has_key() method of the dictionary.
Here is a small example using a dictionary:
>>> tel = {'jack': 4098, 'sape': 4139}
>>> tel['guido'] = 4127
>>> tel
{'sape': 4139, 'guido': 4127, 'jack': 4098}
>>> tel['jack']
4098
>>> del tel['sape']
>>> tel['irv'] = 4127
>>> tel
{'guido': 4127, 'irv': 4127, 'jack': 4098}
>>> tel.keys()
['guido', 'irv', 'jack']
>>> tel.has_key('guido')
True
The dict() contructor builds dictionaries directly from lists of key-value pairs stored as tuples. When the pairs form a pattern, list comprehensions can compactly specify the key-value list.
>>> dict([('sape', 4139), ('guido', 4127), ('jack', 4098)])
{'sape': 4139, 'jack': 4098, 'guido': 4127}
>>> dict([(x, x**2) for x in vec]) # use a list comprehension
{2: 4, 4: 16, 6: 36}
When looping through dictionaries, the key and corresponding value can be retrieved at the same time using the items() method.
>>> knights = {'gallahad': 'the pure', 'robin': 'the brave'}
>>> for k, v in knights.items():
... print k, v
...
gallahad the pure
robin the brave
When looping through a sequence, the position index and corresponding value can be retrieved at the same time using the enumerate() function.
>>> for i, v in enumerate(['tic', 'tac', 'toe']): ... print i, v ... 0 tic 1 tac 2 toe
To loop over two or more sequences at the same time, the entries can be paired with the zip() function.
>>> questions = ['name', 'quest', 'favorite color'] >>> answers = ['lancelot', 'the holy grail', 'blue'] >>> for q, a in zip(questions, answers): ... print 'What is your %s? It is %s.' % (q, a) ... What is your name? It is lancelot. What is your quest? It is the holy grail. What is your favorite color? It is blue.
The conditions used in while and if statements above can
contain other operators besides comparisons.
The comparison operators in and not in check whether a value
occurs (does not occur) in a sequence. The operators is and
is not compare whether two objects are really the same object; this
only matters for mutable objects like lists. All comparison operators
have the same priority, which is lower than that of all numerical
operators.
Comparisons can be chained. For example, a < b == c tests
whether a is less than b and moreover b equals
c.
Comparisons may be combined by the Boolean operators and and
or, and the outcome of a comparison (or of any other Boolean
expression) may be negated with not. These all have lower
priorities than comparison operators again; between them, not has
the highest priority, and or the lowest, so that
A and not B or C is equivalent to (A and (not B)) or C. Of
course, parentheses can be used to express the desired composition.
The Boolean operators and and or are so-called
short-circuit operators: their arguments are evaluated from
left to right, and evaluation stops as soon as the outcome is
determined. For example, if A and C are true but
B is false, A and B and C does not evaluate the
expression C. In general, the return value of a short-circuit
operator, when used as a general value and not as a Boolean, is the
last evaluated argument.
It is possible to assign the result of a comparison or other Boolean expression to a variable. For example,
>>> string1, string2, string3 = '', 'Trondheim', 'Hammer Dance' >>> non_null = string1 or string2 or string3 >>> non_null 'Trondheim'
Note that in Python, unlike C, assignment cannot occur inside expressions.
C programmers may grumble about this, but it avoids a common class of
problems encountered in C programs: typing = in an expression when
== was intended.
Sequence objects may be compared to other objects with the same sequence type. The comparison uses lexicographical ordering: first the first two items are compared, and if they differ this determines the outcome of the comparison; if they are equal, the next two items are compared, and so on, until either sequence is exhausted. If two items to be compared are themselves sequences of the same type, the lexicographical comparison is carried out recursively. If all items of two sequences compare equal, the sequences are considered equal. If one sequence is an initial sub-sequence of the other, the shorter sequence is the smaller (lesser) one. Lexicographical ordering for strings uses the ASCII ordering for individual characters. Some examples of comparisons between sequences with the same types:
(1, 2, 3) < (1, 2, 4)
[1, 2, 3] < [1, 2, 4]
'ABC' < 'C' < 'Pascal' < 'Python'
(1, 2, 3, 4) < (1, 2, 4)
(1, 2) < (1, 2, -1)
(1, 2, 3) == (1.0, 2.0, 3.0)
(1, 2, ('aa', 'ab')) < (1, 2, ('abc', 'a'), 4)
Note that comparing objects of different types is legal. The outcome is deterministic but arbitrary: the types are ordered by their name. Thus, a list is always smaller than a string, a string is always smaller than a tuple, etc. Mixed numeric types are compared according to their numeric value, so 0 equals 0.0, etc.5.1
|
|
|
Python Tutorial | |
|