% TEMPLATE for Usenix papers, specifically to meet requirements of
%  TCL97 committee.
% originally a template for producing IEEE-format articles using LaTeX.
%   written by Matthew Ward, CS Department, Worcester Polytechnic Institute.
% adapted by David Beazley for his excellent SWIG paper in Proceedings,
%   Tcl 96
% turned into a smartass generic template by De Clarke, with thanks to
%   both the above pioneers
% use at your own risk.  Complaints to /dev/null.
% make it two column with no page numbering, default is 10 point
\documentstyle[twocolumn]{article}
\pagestyle{empty}

%set dimensions of columns, gap between columns, and space between paragraphs
%\setlength{\textheight}{8.75in}
\setlength{\textheight}{9.0in}
\setlength{\columnsep}{0.25in}
\setlength{\textwidth}{6.45in}
\setlength{\footheight}{0.0in}
\setlength{\topmargin}{0.0in}
\setlength{\headheight}{0.0in}
\setlength{\headsep}{0.0in}
\setlength{\oddsidemargin}{0in}
%\setlength{\oddsidemargin}{-.065in}
%\setlength{\oddsidemargin}{-.17in}
\setlength{\parindent}{0pc}

% started out with art10.sty and modified params to conform to IEEE format
% further mods to conform to Usenix standard

\makeatletter
%as Latex considers descenders in its calculation of interline spacing,
%to get 12 point spacing for normalsize text, must set it to 10 points
\def\@normalsize{\@setsize\normalsize{12pt}\xpt\@xpt
\abovedisplayskip 10pt plus2pt minus5pt\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip \z@ plus3pt\belowdisplayshortskip 6pt plus3pt
minus3pt\let\@listi\@listI} 

%need a 12 pt font size for subsection and abstract headings
\def\subsize{\@setsize\subsize{12pt}\xipt\@xipt}

%make section titles bold and 12 point, 2 blank lines before, 1 after
\def\section{\@startsection {section}{1}{\z@}{24pt plus 2pt minus 2pt}
{12pt plus 2pt minus 2pt}{\large\bf}}

%make subsection titles bold and 11 point, 1 blank line before, 1 after
\def\subsection{\@startsection {subsection}{2}{\z@}{12pt plus 2pt minus 2pt}
{12pt plus 2pt minus 2pt}{\subsize\bf}}
\makeatother

\newcommand{\ignore}[1]{}
%\renewcommand{\thesubsection}{\arabic{subsection}.}

\begin{document}

%don't want date printed
\date{}

%make title bold and 14 pt font (Latex default is non-bold, 16 pt)
\title{\Large \bf Wonderful : A Terrific Application and Fascinating Paper}

%for single author (just remove % characters)
\author{{Your N.\ Here} \\
{\em Your Department} \\
{\em Your Institution}\\
{\em Your City, State, ZIP}\\
{\em yourname@host.site.dom}}

%  My Department \\
%  My Institute \\
%  My City, ST, zip}
 
% If you have Two Authors use this:
%\author{\begin{tabular}[t]{c@{\extracolsep{8em}}c}
%  Author First 			& Author Second \\
% \\
%  Department of Author First,	   	& Company Employing Me, \\
%  with a Continuation			& MyCity, S2~~ZZZZ2.  \\
%  and                                  & \\
%  Even More Continuation 		& \\
%  Institution First,  City1, S1~~ZZZZ1.	& 
%\end{tabular}}

\maketitle

% You have to do this to suppress page numbers.  Don't ask.
\thispagestyle{empty}


\subsection*{Abstract}
{\em
Your Abstract Text Goes Here.  Just a few facts.
Whet our appetites.
}

\section{Introduction}

A paragraph of text goes here.  Lots of text.  Plenty of interesting
text. \\

More fascinating text. Features galore, plethora of promises.\\

\section{This is Another Section}

Some embedded literal typset code might 
look like the following :

{\tt \small
\begin{verbatim}
int wrap_fact(ClientData clientData,
              Tcl_Interp *interp,
              int argc, char *argv[]) {
    int result;
    int arg0;
    if (argc != 2) {
        interp->result = "wrong # args";
        return TCL_ERROR;
    }
    arg0 = atoi(argv[1]);
    result = fact(arg0);
    sprintf(interp->result,"%d",result);
    return TCL_OK;
}
\end{verbatim}
}

Now we're going to cite somebody.  Watch for the cite tag.
Here it comes \cite{heidrich,otcl,perl5}.  And a bit later
we will cite another one.  Stay tuned... \cite{ousterhout}.

\section{This Section has SubSections}
\subsection{First SubSection}

Here's a typical figure reference.  The figure is centered at the
top of the column.  It's scaled.  It's explicitly placed.  You'll
have to tweak the numbers to get what you want.\\

\begin{figure}[t]
\begin{center}
\begin{picture}(300,150)(0,200)
\put(-15,-30){\special{psfile = fig1.ps hscale = 50 vscale = 50}}
\end{picture}\\
\end{center}
\caption{Wonderful Flowchart}
\end{figure}

This text came after the figure, so we'll casually refer to Figure 1
as we go on our merry way.

\subsection{New Subsection}

It can get tricky typesetting Tcl and C code in LaTeX because they share
a lot of mystical feelings about certain magic characters.  You
will have to do a lot of escaping to typeset curly braces and percent
signs, for example, like this:
``The {\tt \%module} directive
sets the name of the initialization function.  This is optional, but is
recommended if building a Tcl 7.5 module.
Everything inside the {\tt \%\{, \%\}}
block is copied directly into the output. allowing the inclusion of
header files and additional C code." \\

Sometimes you want to really call attention to a piece of text.  You
can center it in the column like this:
\begin{center}
{\tt \_1008e614\_Vector\_p}
\end{center}
and people will really notice it.\\

\noindent
The noindent at the start of this paragraph makes it clear that it's
a continuation of the preceding text, not a new para in its own right.


Now this is an ingenious way to get a forced space.
{\tt Real~$*$} and {\tt double~$*$} are equivalent. 

Now here is another way to call attention to a line of code, but instead
of centering it, we noindent and bold it.\\

\noindent
{\bf \tt size\_t : fread ptr size nobj stream } \\

And here we have made an indented para like a definition tag (dt)
in HTML.  You don't need a surrounding list macro pair.
\begin{itemize}
\item[]  {\tt fread} reads from {\tt stream} into the array {\tt ptr} at
most {\tt nobj} objects of size {\tt size}.   {\tt fread} returns
the number of objects read. 
\end{itemize}
This concludes the definitions tag.

\subsection{Last SubSection}

Well, it's getting boring isn't it.  This is the last subsection
before we wrap it up.

\section{Acknowledgments}

A polite author always includes acknowledgments.  Thank everyone,
especially those who funded the work. 

\section{Availability}

It's great when this section says that MyWonderfulApp is free software, 
available via anonymous FTP from

\begin{center}
{\tt ftp.site.dom/pub/myname/Wonderful}\\
\end{center}

Also, it's even greater when you can write that information is also 
available on the Wonderful homepage at 

\begin{center}
{\tt http://www.site.dom/\~{}myname/SWIG}
\end{center}

Now we get serious and fill in those references.  Remember you will
have to run latex twice on the document in order to resolve those
cite tags you met earlier.  This is where they get resolved.
We've preserved some real ones in addition to the template-speak.
After the bibliography you are DONE.

\begin{thebibliography}{99}

\bibitem[Beazley]{beazley} D.~M.~Beazley and P.~S.~Lomdahl, 
{\em Message-Passing Multi-Cell Molecular Dynamics on the Connection
Machine 5}, Parall.~Comp.~ 20 (1994) p. 173-195.

\bibitem[RealName]{CitePetName} A.~N.~Author and A.~N.~Other, 
{\em Title of Riveting Article}, JournalName VolNum (Year) p. Start-End

\bibitem[ET]{embed} Embedded Tk, \\
{\tt ftp://ftp.vnet.net/pub/users/drh/ET.html}

\bibitem[Expect]{expect} Don Libes, {\em Exploring Expect}, O'Reilly \& Associates, Inc. (1995).

\bibitem[Heidrich]{heidrich} Wolfgang Heidrich and Philipp Slusallek, {\em
Automatic Generation of Tcl Bindings for C and C++ Libraries.},
USENIX 3rd Annual Tcl/Tk Workshop (1995).

\bibitem[Ousterhout]{ousterhout} John K. Ousterhout, {\em Tcl and the Tk Toolkit}, Addison-Wesley Publishers (1994).

\bibitem[Perl5]{perl5} Perl5 Programmers reference,\\
{\tt http://www.metronet.com/perlinfo/doc}, (1996).

\bibitem[Wetherall]{otcl} D. Wetherall, C. J. Lindblad, ``Extending Tcl for
Dynamic Object-Oriented Programming'', Proceedings of the USENIX 3rd Annual Tcl/Tk Workshop (1995).

\end{thebibliography}

\end{document}