[hylafax-users] Migration Problem

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Migration Problem
From: MichaelHoeller@xxxxxxxxxxx (Michael Hoeller)
Reply-to: MichaelHoeller@xxxxxxxxxxx
Date: Mon, 22 Dec 2003 22:22:54 +0100

Hi !

I have a problem with a migratin from SuSE 8.2 to 9.0 (hylafax-4.1.7)
With the SuSE 8.2 there are no problems, running hylafax. I have 
installed the SuSE 9.0 (hylafax-4.1.7) on the same machine in parallel 
and kept every hardware like it was -- but I can't recieve faxes....
Faxing is no problem this works. Basically I have installed hylafax, 
copieed my old config files to /var/spool/fax/etc, adjusted the user to 
fax:uucp (seems to be changed) and run faxsetup. 
All processes run as if all is ok but no faxes can be recieved....

I have attached the log from /var/log/messages and also my config file.
Anyone how has an idea what I have done wrong? How can I get more 
logging info??

Thanks and have a nice day
Michael


Dec 22 21:54:13 tamboti HylaFAX[5710]: HylaFAX INET Protocol Server: 
restarted.
Dec 22 21:54:13 tamboti HylaFAX[5710]: HylaFAX Old Protocol Server: 
restarted.
Dec 22 21:54:13 tamboti HylaFAX[5710]: HylaFAX SNPP Protocol Server: 
restarted.
Dec 22 21:54:33 tamboti FaxGetty[5668]: MODEM TIMEOUT: reading line from 
modem
Dec 22 21:54:33 tamboti FaxGetty[5668]: MODEM <Timeout>
Dec 22 21:54:33 tamboti FaxGetty[5668]: MODEM set DTR OFF
Dec 22 21:54:33 tamboti FaxGetty[5668]: /dev/faxbox: Can not initialize 
modem.
Dec 22 21:54:33 tamboti FaxGetty[5668]: STATE CHANGE: BASE -> MODEMWAIT 
(timeout 30)
Dec 22 21:54:33 tamboti FaxGetty[5668]: HELLO
Dec 22 21:55:04 tamboti FaxGetty[5668]: MODEM set DTR OFF
Dec 22 21:55:04 tamboti FaxGetty[5668]: DELAY 75 ms
Dec 22 21:55:04 tamboti FaxGetty[5668]: MODEM set DTR ON
Dec 22 21:55:04 tamboti FaxGetty[5668]: DELAY 1000 ms
Dec 22 21:55:06 tamboti FaxGetty[5668]: MODEM set baud rate: 19200 baud, 
input flow XON/XOFF, output flow XON/XOFF
Dec 22 21:55:06 tamboti FaxGetty[5668]: DELAY 10 ms
Dec 22 21:55:06 tamboti FaxGetty[5668]: MODEM flush i/o
Dec 22 21:55:06 tamboti FaxGetty[5668]: <-- [4:ATZ\r]
Dec 22 21:55:06 tamboti FaxGetty[5668]: <-- <3:41 54 5A>
Dec 22 21:55:06 tamboti FaxGetty[5668]: <-- <1:0D>


===============================================================

#
FAXNumber:              +49.7125.xxxx
InternationalPrefix:    00
DialStringRules:        etc/dialrules.europe
RecvFileMode:           644
LogFileMode:            644
DeviceMode:             640
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "+49.7125.xxxx"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use this to supply a hint
ModemRate:              19200           # max rate for DCE-DTE 
communication
#ModemFlowControl:      xonxoff         # XON/XOFF flow control assumed
#ModemSetupDTRCmd:      AT&D2           # setup so DTR drop resets modem
#ModemSetupDCDCmd:      AT&C1           # setup so DCD reflects carrier 
(or not)
#
# We can append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer.  This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
#     put it in the ModemDialCmd; e.g. "DT9%s@".
#
#ModemDialCmd:          ATDT%s          # T for tone dialing
#
# Other possible configuration stuff.  The default strings are
# shown below.  Only those that are different from the defaults
# need to be included in the configuration file.
#
#ModemResetCmds:                ""              # stuff to do when modem 
is reset
#ModemAnswerCmd:                ATA             # use this to answer 
phone
#ModemNoFlowCmd:                AT&K            # disable flow control 
cmd
#ModemHardFlowCmd:      AT&K3           # hardware flow control cmd
#ModemSoftFlowCmd:      AT&K4           # software flow control cmd
#ModemNoAutoAnswerCmd:  ATS0=0          # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd:     "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd:       ATE0            # disable command echo
#ModemVerboseResultsCmd:        ATV1            # enable verbose command 
results
#ModemResultCodesCmd:   ATQ0            # enable result codes
#ModemOnHookCmd:                ATH0            # place phone on hook 
(hangup)
#ModemSoftResetCmd:     ATZ             # do soft reset of modem
#ModemSoftResetCmdDelay:        3000    # pause after soft reset
#ModemWaitTimeCmd:      ATS7=60         # wait 60 seconds for carrier
#ModemCommaPauseTimeCmd:        ATS8=2          # comma pause time is 2 
seconds
#ModemRecvFillOrder:    LSB2MSB         # bit order of received 
facsimile
#ModemSendFillOrder:    LSB2MSB         # bit order modem expects for 
transmit
#
# Configuration parameters for Class 2 modems.
#
Class2Cmd:              AT+FCLASS=2     # command to enter class 2
Class2BORCmd:           AT+FBOR=0       # bit order for phase B/C/D 
(direct)
Class2RELCmd:           AT+FREL=1       # byte-align EOL codes on recv
Class2CQCmd:            ""              # commands to enable copy 
quality proc.
Class2AbortCmd:         AT+FK           # abort session command
Class2CQQueryCmd:       AT+FCQ=?        # query for copy quality 
capabilities
Class2DCCQueryCmd:      AT+FDCC=?       # query for modem capabilities
Class2TBCCmd:           AT+FTBC=0       # setup stream mode
Class2CRCmd:            AT+FCR=1        # enable capability to receive
Class2PHCTOCmd:         AT+FPHCTO=30    # set phase C timeout parameter
Class2BUGCmd:           AT+FBUG=1       # enable HDLC frame tracing
Class2LIDCmd:           AT+FLID         # set local identifier command
Class2DCCCmd:           AT+FDCC         # set modem capabilities command
Class2DISCmd:           AT+FDIS         # set session parameters command
Class2DDISCmd:          ""              # disable pre-dial DIS command 
hack
Class2CIGCmd:           AT+FCIG         # set polling identifier command
Class2PTSCmd:           AT+FPTS         # set post-page status command
Class2SPLCmd:           AT+FSPL         # set polling indicator command
#
# If Class2RecvDataTrigger is not set, then it is set to DC1
#
Class2RecvDataTrigger:  ""              # character sent to modem to 
start recv
Class2XmitWaitForXON:   yes             # if true, wait for XON before 
send
# 
# Tracing
ServerTracing:          0xFFF
ModemResetDelay:        1000
ModemClassQueryCmd:     "!0,1,2"
ModemRevQueryCmd:       "!SAFER-FAX"
Class2DCCQueryCmd:      "!(0,1),(0-5),0,2,0,0,0,(0-7)"
Class2CQQueryCmd:       "!(0),(0)"
Class2APQueryCmd:       "none"
Class2SPLCmd:           "none"
RingsBeforeAnswer:       1

-- 
Encrypted eMail welcome! 
Get my OpenPGP-Key ID: 0xE9B00731 from: wwwkeys.de.pgp.net


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] Migration Problem
  - From: Giulio Orsero

Prev by Date: [hylafax-users] "Wedged"? Help! My modem's underwear appears to be creeping up on it! :)
Next by Date: Re: [hylafax-users] Tiff2fax bug?
Previous by thread: Re: [hylafax-users] "Wedged"? Help! My modem's underwear appears to be creeping up on it! :)
Next by thread: Re: [hylafax-users] Migration Problem
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services