|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] hylafax does not send mails after fax-reciving
Hello mailinglist,
when my hylafax receives faxes i get no eMail (not to FaxMaster and not
to user in etc/FaxDispatch).
Im running hylafax in version 4.1.2-2 (Debian SID) + capi4hylafax on a
Pentium III/800 Computer.
The /var/log/hylafax/capi4hylafax contains:
May 19 23:22:03.84: [11279]: c2faxrecv - INFO: Fax received and calling
'/var/spool/fax/bin/faxrcvd "/var/spool/hylafax/recvq/fax00004.tif"
"faxCAPI" "00000007" ""'.
May 19 23:22:03.91: [11279]: c2faxrecv - INFO: Connection is droped with
reason 0x3490 (Normal call clearing).
May 19 23:22:03.91: [11279]: c2faxrecv - INFO: SESSION END
May 19 23:22:05.57: [11279]: c2faxrecv - INFO: SESSION BEGIN 00000008
+49.821.666635
May 19 23:22:05.57: [11279]: c2faxrecv - INFO: Incoming analog call from
821666635 to 666635.
May 19 23:22:15.26: [11279]: c2faxrecv - INFO: Connection established.
May 19 23:22:15.26: [11279]: c2faxrecv - INFO: StationID = +49 821
666635
May 19 23:22:15.26: [11279]: c2faxrecv - INFO: BaudRate = 9600
May 19 23:22:15.26: [11279]: c2faxrecv - INFO: Flags = HighRes
May 19 23:22:15.26: [11279]: c2faxrecv - INFO: Write fax to file
/var/spool/hylafax/recvq/fax00005.tif.
May 19 23:22:26.65: [11279]: c2faxrecv - INFO: Page 1 was received. -
Last Page!
May 19 23:22:29.35: [11279]: c2faxrecv - INFO: Fax received and calling
'/var/spool/fax/bin/faxrcvd "/var/spool/hylafax/recvq/fax00005.tif"
"faxCAPI" "00000008" ""'.
The faxrcvd-script is in /var/spool/hylafax/bin (as default). But a
symbolic link form /var/spool/fax to /var/spool/hylafax is not the solution.
The faxrcvd-script is not changed.
What is wrong in my installation?
Gerhard
P. S. Here my /var/spool/hylafax/faxrcvd:
if [ $# != 6 ]; then
echo "Usage: $0 file devID commID error-msg CIDNumber CIDName "
exit 1
fi
test -f etc/setup.cache || {
SPOOL=`pwd`
cat<<EOF
FATAL ERROR: $SPOOL/etc/setup.cache is missing!
The file $SPOOL/etc/setup.cache is not present. This
probably means the machine has not been setup using the faxsetup(8C)
command. Read the documentation on setting up HylaFAX before you
startup a server system.
EOF
exit 1
}
. etc/setup.cache
INFO=$SBIN/faxinfo
FAX2PS=$TIFFBIN/fax2ps
MIMENCODE=mimencode
TIFF2PS=tiff2ps
PS2PDF=ps2pdf
TOADDR=FaxMaster
#
# Permit various types of attachment types: ps, tif, pdf
# Note that non-ASCII filetypes require metamail.
# pdf requires tiff2ps and ps2pdf
#
FILETYPE=ps
#
# There is no good portable way to find out the fully qualified
# domain name (FQDN) of the host or the TCP port for the hylafax
# service so we fudge here. Folks may want to tailor this to
# their needs; e.g. add a domain or use localhost so the loopback
# interface is used.
#
HOSTNAME=`hostname`
# XXX no good way to find FQDN
PORT=4559
# XXX no good way to lookup service
FILE="$1"
DEVICE="$2"
COMMID="$3"
MSG="$4"
CIDNUMBER="$5"
CIDNAME="$6"
FILENAME=`echo $FILE | $SED -e 's/\.tif//' -e 's/recvq\///'`
if [ -f $FILE ]; then
#
# Check the sender's TSI and setup to dispatch
# facsimile received from well-known senders.
#
SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`"
SENDTO=
if [ -f etc/FaxDispatch ]; then
. etc/FaxDispatch # NB: FaxDispatch sets SENDTO
fi
if [ "$TOADDR" != "$SENDTO" ]; then # don't send FaxMaster duplicate
(echo "To: $TOADDR"
echo "From: The HylaFAX Receive Agent <fax>"
echo "Subject: Facsimile received from $SENDER";
echo ""
echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
echo "ReceivedOn: $DEVICE"
if [ "$MSG" ]; then
echo ""
echo "The full document was not received because:"
echo ""
echo " $MSG"
echo ""
echo " ---- Transcript of session follows ----"
echo ""
if [ -f log/c$COMMID ]; then
$SED -e '/-- data/d' \
-e '/start.*timer/d' -e '/stop.*timer/d' \
log/c$COMMID
elif [ -n "$COMMID" ]; then
echo " No transcript available (CommID c$COMMID)."
else
echo " No transcript available."
fi
else
echo " CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
fi
if [ "$CIDNUMBER" ]; then
echo " CIDNumber: $CIDNUMBER"
echo ""
fi
if [ "$CIDNAME" ]; then
echo " CIDName: $CIDNAME"
echo ""
fi
if [ -n "$SENDTO" ]; then
echo ""
echo "The facsimile was automatically dispatched to: $SENDTO."
fi
) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
fi
if [ -n "$SENDTO" ]; then
(MIMEBOUNDARY="NextPart$$"
echo "Mime-Version: 1.0"
echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
echo "Content-Transfer-Encoding: 7bit"
echo "To: $SENDTO"
echo "From: The HylaFAX Receive Agent <fax>"
echo "Subject: Facsimile received from $SENDER";
echo ""
echo "--$MIMEBOUNDARY"
echo "Content-Type: text/plain; charset=us-ascii"
echo "Content-Transfer-Encoding: 7bit"
echo ""
echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
echo "ReceivedOn: $DEVICE"
if [ "$MSG" ]; then
echo ""
echo "The full document was not received because:"
echo ""
echo " $MSG"
echo ""
echo " ---- Transcript of session follows ----"
echo ""
if [ -f log/c$COMMID ]; then
$SED -e '/-- data/d' \
-e '/start.*timer/d' -e '/stop.*timer/d' \
log/c$COMMID
elif [ -n "$COMMID" ]; then
echo " No transcript available (CommID c$COMMID)."
else
echo " No transcript available."
fi
else
echo " CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
fi
if [ "$CIDNUMBER" ]; then
echo " CIDNumber: $CIDNUMBER"
echo ""
fi
if [ "$CIDNAME" ]; then
echo " CIDName: $CIDNAME"
echo ""
fi
echo ""
echo "--$MIMEBOUNDARY"
if [ "$FILETYPE" = "tif" ]; then
echo "Content-Type: image/tiff; name=\"$FILENAME.tif\""
echo "Content-Description: FAX document"
echo "Content-Transfer-Encoding: base64"
echo "Content-Disposition: attachment; filename=\"$FILENAME.tif\""
echo ""
$MIMENCODE $FILE 2>/dev/null
elif [ "$FILETYPE" = "pdf" ]; then
echo "Content-Type: application/pdf; name=\"c$COMMID.pdf\""
echo "Content-Description: FAX document"
echo "Content-Transfer-Encoding: base64"
echo "Content-Disposition: attachment; filename=\"c$COMMID.pdf\""
echo ""
$TIFF2PS -a -O $FILE.ps $FILE 2>/dev/null # fax2ps looks bad
$PS2PDF $FILE.ps $FILE.pdf 2>/dev/null
$MIMENCODE $FILE.pdf 2>/dev/null
$RM -f $FILE.ps $FILE.pdf 2>/dev/null
else # default as Postscript
echo "Content-Type: application/postscript; name=\"$FILENAME.ps\""
echo "Content-Description: FAX document"
echo "Content-Transfer-Encoding: 7bit"
echo "Content-Disposition: attachment; filename=\"$FILENAME.ps\""
echo ""
$FAX2PS $FILE 2>/dev/null
fi
echo ""
echo "--$MIMEBOUNDARY--"
) | 2>&1 $SENDMAIL -ffax -oi $SENDTO
fi
else
#
# Generate notification mail for a failed attempt.
#
(echo "To: $TOADDR"
echo "From: The HylaFAX Receive Agent <fax>"
echo "Subject: facsimile not received"
echo ""
echo "An attempt to receive facsimile on $DEVICE failed because:"
echo ""
echo " $MSG"
echo ""
echo " ---- Transcript of session follows ----"
echo ""
if [ -f log/c$COMMID ]; then
$SED -e '/-- data/d' \
-e '/start.*timer/d' -e '/stop.*timer/d' \
log/c$COMMID
elif [ -n "$COMMID" ]; then
echo " No transcript available (CommID c$COMMID)."
else
echo " No transcript available."
fi
) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
fi
Here my /var/spool/hylafax/etc/FaxDispatch:
FILETYPE=pdf;
case "$SENDER" in
# send all faxes from XX to lala
*49*821*666635*) SENDTO=gerhard@gustav.duck;;
# send all the remainig to FaxMaster
*) SENDTO=FaxMaster;
esac
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
