|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Numerous problems with HF4.1 & MicroLink 56kFun IIa
Hello all,
On Mon, 13 May 2002, Lee Howard wrote:
>On 2002.05.13 04:53 Karim 'Kasi Mir' Senoucci wrote:
>> Hello all,
>> On Mon, 13 May 2002, Lee Howard wrote:
>>
>> [...]
>> >> ModemType: Class2 # use this to supply a hint
>> >
>> >Tried using Class 1?
>>
>> Yes, I did, but the modem couldn't even be initialized for receiving -
>> faxgetty always gave up. I can try and dig up the reports if you think
>> that would help.
>
>Definitely, yes.
Okay, I will try to find the old logs - I tried out Class1 about four
months ago.
[...]
>> (The X3 part actually isn't needed anymore as the modem now gets a valid
>> "line free" signal directly without dialing "0" first.) If I use ATZ,
>> the initialization of the modem fails and I can't send or receive
>> anything! I think it might have to do something with the fact that the
>> modem answers to "ATZ" with "0" (as the initialization *always* fails
>> there) but as I stated before, I'm not that much of a fax expert. How
>> can I use "ATZ" above with the Fun IIa?
>
>Please send probemodem output. However, this modem is broken if it
>returns "0" after "ATZ".
It definitely does, I tested that again just minutes ago.
Here is the probemodem output - I hope this helps.
--------------------------------------------------------------------------
Probing for best speed to talk to modem: 38400 OK.
This looks like a Class 1+2 modem.
ATI0 RESULT = "OK" RESPONSE = "OK"
ATI1 RESULT = "OK" RESPONSE = "2F9D"
ATI2 RESULT = "OK" RESPONSE = "OK"
ATI3 RESULT = "OK" RESPONSE = "Version 1.00 / 16.05.2001"
Class 1 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2,8"
AT+FCLASS? RESULT = "OK" RESPONSE = "2"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "0,1"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTH=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRH=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTM=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FRS=? RESULT = "ERROR" RESPONSE = "ERROR"
Class 2 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2,8"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=2 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "2"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "0,1"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAXERR=? RESULT = "OK" RESPONSE = "OK"
AT+FAXERR? RESULT = "OK" RESPONSE = "0"
AT+FBADLIN=? RESULT = "OK" RESPONSE = "0-255"
AT+FBADLIN? RESULT = "OK" RESPONSE = "5"
AT+FBADMUL=? RESULT = "OK" RESPONSE = "0-255"
AT+FBADMUL? RESULT = "OK" RESPONSE = "20"
AT+FBOR=? RESULT = "OK" RESPONSE = "0-3"
AT+FBOR? RESULT = "OK" RESPONSE = "0"
AT+FBUF=? RESULT = "OK" RESPONSE = "OK"
AT+FBUF? RESULT = "OK" RESPONSE = "2448,2252,2124,1"
AT+FBUG=? RESULT = "OK" RESPONSE = "0,1"
AT+FBUG? RESULT = "OK" RESPONSE = "0"
AT+FCIG=? RESULT = "OK" RESPONSE = "(32-127)"
AT+FCIG? RESULT = "OK" RESPONSE = "" ""
AT+FCQ=? RESULT = "OK" RESPONSE = "0-1"
AT+FCQ? RESULT = "OK" RESPONSE = "0"
AT+FCR=? RESULT = "OK" RESPONSE = "0,1"
AT+FCR? RESULT = "OK" RESPONSE = "1"
AT+FTBC=? RESULT = "OK" RESPONSE = "0"
AT+FTBC? RESULT = "OK" RESPONSE = "0"
AT+FDCC=? RESULT = "OK" RESPONSE = "(0-1),(0-5),(0-2),(0-2),(0-2),(0),(0),(0-7)"
AT+FDCC? RESULT = "OK" RESPONSE = "1,5,2,2,2,0,0,0"
AT+FDCS=? RESULT = "OK" RESPONSE = "OK"
AT+FDCS? RESULT = "OK" RESPONSE = "0,0,0,0,0,0,0,0"
AT+FDIS=? RESULT = "OK" RESPONSE = "(0-1),(0-5),(0-2),(0-2),(0-2),(0),(0),(0-7)"
AT+FDIS? RESULT = "OK" RESPONSE = "1,5,2,2,2,0,0,0"
AT+FDT=? RESULT = "OK" RESPONSE = "OK"
AT+FDT? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FECM=? RESULT = "OK" RESPONSE = "0"
AT+FECM? RESULT = "OK" RESPONSE = "0"
AT+FET=? RESULT = "OK" RESPONSE = "0-2"
AT+FET? RESULT = "OK" RESPONSE = "0"
AT+FLID=? RESULT = "OK" RESPONSE = "(32-127)"
AT+FLID? RESULT = "OK" RESPONSE = ""xxxxxx xxx ""
AT+FLNFC=? RESULT = "OK" RESPONSE = "0"
AT+FLNFC? RESULT = "OK" RESPONSE = "0"
AT+FLPL=? RESULT = "OK" RESPONSE = "0,1"
AT+FLPL? RESULT = "OK" RESPONSE = "0"
AT+FMDL? RESULT = "OK" RESPONSE = ""MicroLink 56k Fun II a""
AT+FMFR? RESULT = "OK" RESPONSE = ""ELSA AG, Aachen (Germany)""
AT+FMINSP=? RESULT = "OK" RESPONSE = "0-3"
AT+FMINSP? RESULT = "OK" RESPONSE = "0"
AT+FPHCTO=? RESULT = "OK" RESPONSE = "0-255"
AT+FPHCTO? RESULT = "OK" RESPONSE = "30"
AT+FPTS=? RESULT = "OK" RESPONSE = "1-3"
AT+FPTS? RESULT = "OK" RESPONSE = "1"
AT+FRBC=? RESULT = "OK" RESPONSE = "0"
AT+FRBC? RESULT = "OK" RESPONSE = "0"
AT+FREL=? RESULT = "OK" RESPONSE = "0"
AT+FREL? RESULT = "OK" RESPONSE = "0"
AT+FREV? RESULT = "OK" RESPONSE = ""Version 1.00 / 16.05.2001""
AT+FSPL=? RESULT = "OK" RESPONSE = "0,1"
AT+FSPL? RESULT = "OK" RESPONSE = "0"
AT+FTBC=? RESULT = "OK" RESPONSE = "0"
AT+FTBC? RESULT = "OK" RESPONSE = "0"
AT+FVRFC=? RESULT = "OK" RESPONSE = "0"
AT+FVRFC? RESULT = "OK" RESPONSE = "0"
AT+FWDFC=? RESULT = "OK" RESPONSE = "0"
AT+FWDFC? RESULT = "OK" RESPONSE = "0"
AT+FK=? RESULT = "OK" RESPONSE = "OK"
--------------------------------------------------------------------------
Greetings
Kasi Mir
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
