Re: [hylafax-users] Errors receiving faxes

[Lee Howard <faxguy@deanox.com>]

On 2002.05.09 09:04 Jerry Stephens wrote:
> I am running Hylafax version 4.1.1 on Redhat 7.2. When receiving faxes I
> frequently, (95% of the time), get no pages. If I have the customer send
> the
> same fax directly to a dedicated fax machine, it comes over fine. Sending
> faxes poses no problem.
> 
> Here is the log from the latest session followed by config.ttyS0. Any
> idea
> what the problem might be?

Well, since you're not using a prototype config file, it would have been 
better if you also included probemodem output.

> May 09 08:26:57.04: [ 1472]: <-- [9:AT+FRH=3\r]
> May 09 08:26:57.36: [ 1472]: --> [7:CONNECT]
> May 09 08:26:58.98: [ 1472]: --> [5:ERROR]
> May 09 08:26:58.98: [ 1472]: MODEM Command error
> May 09 08:26:58.98: [ 1472]: FCS error

> May 09 08:27:05.02: [ 1472]: RECV training at v.29 9600 bit/s
> May 09 08:27:05.02: [ 1472]: <-- [10:AT+FRM=96\r]
> May 09 08:27:05.29: [ 1472]: --> [7:CONNECT]
> May 09 08:27:06.81: [ 1472]: RECV: TCF 1830 bytes, 22% non-zero, 167
> zero-run
> May 09 08:27:06.81: [ 1472]: RECV: reject TCF (too many non-zero, max
> 10%)
> May 09 08:27:06.81: [ 1472]: RECV: reject TCF (zero run too short, min
> 1200)

Are you sure that there isn't a horrible amount of interference/static on 
this line?

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null