RedHat
7.3
HylaFAX version
4.1.1
U.S.
Robotics Modem model 5686 (firmware not upgraded to
V.92)
When
running faxsetup, after confirming the Country code,
Area Code, etc; I am told:
Probing
for best speed to talk to modem:
Unable
to deduce DTE-DCE speed; check that you are using
the
correct
device and/or that your modem is setup properly. If
all else
fails, try the -s option to lock the speed.
When
running faxaddmodem –s 38400 ttys1 I get
this:
Using
user-specified 38400 to talk to modem.
/dev/ttys1:
Input/output error
/dev/ttys1:
Input/output error
/usr/sbin/faxaddmodem: /dev/ttys1: Input/output
error
/usr/sbin/faxaddmodem: /dev/ttys1: Input/output
error
/usr/sbin/faxaddmodem: /dev/ttys1: Input/output
error
/usr/sbin/faxaddmodem: kill: (17760) - No such pid
/usr/sbin/faxaddmodem:
/tmp/.faxaddmodem17712/addmodem17712: No such file or
directory
/usr/sbin/faxaddmodem:
/tmp/.faxaddmodem17712/addmodem17712: No such file or
directory
There
was no response from the modem.
Perhaps the modem is
turned off
or the cable between the modem and host is not
connected. Please check the modem and hit a
carriage return
when you
are ready to try again:
The
connection to modem works via minicom at 38400 and
other speeds.
Any ideas or help would be greatly
appreciated!
Thanks,
Eric
Crosby
