Re: flexfax: Multipurpose call routing devices!

[Matthias.Apitz@SOFTCON.de]

root wrote:

[BTW: Is "root" your real e-mail address?]
    
    Here is the log from one of the calls that says it's busy. I called the
    Salesman with this fax machine and he said it's a Panasonic model that has
    the fax, answering machine, and telephone integrated into one machine.
    
    Jan 22 01:03:58.37: [16946]: SESSION BEGIN 00010892 xxxxxxxxxxx
    Jan 22 01:03:58.37: [16946]: SEND FAX: JOB 7323 DEST xxxxxxxxxxx COMMID 
    00010892
    Jan 22 01:03:58.37: [16946]: DELAY 2600 ms
    Jan 22 01:04:01.10: [16946]: <-- [15:ATE0V1Q0S0=0H0\r]
    Jan 22 01:04:01.33: [16946]: --> [2:OK]
    Jan 22 01:04:01.33: [16946]: <-- [28:ATS8=2S7=90S10=255&E5&D3&C1\r]
    Jan 22 01:04:01.53: [16946]: --> [2:OK]
    Jan 22 01:04:01.53: [16946]: <-- [12:AT+FCLASS=2\r]
    Jan 22 01:04:01.69: [16946]: --> [2:OK]
    Jan 22 01:04:01.69: [16946]: <-- [10:AT+FTBC=0\r]
    Jan 22 01:04:01.85: [16946]: --> [2:OK]
    Jan 22 01:04:01.85: [16946]: <-- [10:AT+FBOR=0\r]
    Jan 22 01:04:02.01: [16946]: --> [2:OK]
    Jan 22 01:04:02.01: [16946]: <-- [13:AT+FPHCTO=30\r]
    Jan 22 01:04:02.17: [16946]: --> [2:OK]
    Jan 22 01:04:02.17: [16946]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
    Jan 22 01:04:02.37: [16946]: --> [2:OK]
    Jan 22 01:04:02.37: [16946]: <-- [5:ATM0\r]
    Jan 22 01:04:02.53: [16946]: --> [2:OK]
    Jan 22 01:04:02.53: [16946]: <-- [12:AT+FCLASS=2\r]
    Jan 22 01:04:02.77: [16946]: --> [2:OK]
    Jan 22 01:04:02.77: [16946]: <-- [10:AT+FTBC=0\r]
    Jan 22 01:04:03.05: [16946]: --> [2:OK]
    Jan 22 01:04:03.05: [16946]: <-- [10:AT+FBOR=0\r]
    Jan 22 01:04:03.29: [16946]: --> [2:OK]
    Jan 22 01:04:03.29: [16946]: <-- [13:AT+FPHCTO=30\r]
    Jan 22 01:04:03.53: [16946]: --> [2:OK]
    Jan 22 01:04:03.53: [16946]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
    Jan 22 01:04:03.81: [16946]: --> [2:OK]
    Jan 22 01:04:03.81: [16946]: <-- [31:AT+FLID="Carson's of High Poi"\r]
    Jan 22 01:04:04.09: [16946]: --> [2:OK]
    Jan 22 01:04:04.09: [16946]: DIAL XXXXXXXXXXXXXXXXXXXXXX :-))
    Jan 22 01:04:04.09: [16946]: <-- [17:ATDTxxxxxxxxxxx@\r]
    Jan 22 01:04:34.77: [16946]: --> [4:BUSY]

As you can see from the log it takes ~30 seconds to deliver the
call to the destination and let the modem asume BUSY. For a
normal local call that's to long, isn't it? I think that the
remote side picked up the call, checked the call but didn't
delivered it internally to the fax machine. Does you modem
emit the CNG tone? You may check this by sending a facsimilie
to your own number an pick up the call with a normal phone.

	matthias

    Jan 22 01:04:34.77: [16946]: SEND FAILED: Busy signal detected
    Jan 22 01:04:34.77: [16946]: SEND FAILED: Busy signal detected; too many attempts to dial
    Jan 22 01:04:34.77: [16946]: <-- [5:ATH0\r]
    Jan 22 01:04:39.77: [16946]: MODEM <Timeout>
    Jan 22 01:04:39.89: [16946]: SESSION END
    
    Thanks again for any and all help!
    
    Marty Kirkman