Re: Limiting inbound fax speed

To: Jason Lindquist <linky@see.figure1.net>, flexfax@sgi.com
Subject: Re: flexfax: Limiting inbound fax speed
From: Karl Feichtinger <feichtinger@comconnect.com>
Cc: flexfax@sgi.com
Date: Wed, 03 Dec 1997 11:17:41 +0100

Hi,
Try this in your config.<device> file:
	Class2DCCQueryCmd: "!(0,1),(0-3),(0-2),(0-2),(0,1),0,0,(0-7)"
You should check the original response to the AT+FDCC=? command, and then
replace the second filed. In the above case, (0-3) limits the speed to 9600.
	
	Karl

At 20:47 02.12.1997 -0600, Jason Lindquist wrote:
>Has anyone had any luck limiting the speed of received faxes?

Prev by Date: resending failed faxes
Next by Date: T.30 errors on answer and - RE: hylafax 4.0pl1 can't send fax to certain fax machines
Prev by thread: Limiting inbound fax speed
Next by thread: resending failed faxes
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services