Section "Device" Identifier "devname" Driver "apm" ... EndSection
The driver auto-detects the chipset type, but the following ChipSet names may optionally be specified in the config file "Device" section, and will override the auto-detection:
"6422", "at24", "at3d".The AT25 is Chipset "at3d" and the 6420 is 6422.
The driver will auto-detect the amount of video memory present for all chips. The actual amount of video memory can also be specified with a VideoRam entry in the config file "Device" section.
The following driver Options are supported:
- Option "HWCursor" "boolean"
- Enable or disable the hardware cursor. Default: on.
- Option "NoAccel" "boolean"
- Disable or enable acceleration. Default: acceleration is enabled.
- Option "NoLinear" "boolean"
- Disable or enable use of linear frame buffer. Default: on. Note: it may or may not work. Tell me if you need it.
- Option "PciRetry" "boolean"
- Enable or disable PCI retries. Default: off.
- Option "Remap_DPMS_On" "string"
- Option "Remap_DPMS_Standby" "string"
- Option "Remap_DPMS_Suspend" "string"
- Option "Remap_DPMS_Off" "string"
- Remaps the corresponding DPMS events. I've found that my Hercules 128/3D swaps Off and Suspend events. You can correct that with
Option "Remap_DPMS_Suspend" "Off" Option "Remap_DPMS_Off" "Suspend"in the Device section of the config file.
- Option "SWCursor" "boolean"
- Force the software cursor. Default: off.
- Option "ShadowFB" "boolean"
- Enable or disable use of the shadow framebuffer layer. Default: off.