Under Solaris x86 2.5 and later, there's a system driver (/dev/xsvc
)
that provides this functionality.
It will be detected automatically by the server, so you don't need to install
the aperture driver.
For older Solaris x86 and for Solaris SPARC releases, the source for this
driver is included in
xc/programs/Xserver/hw/xfree86/etc/apSolaris.shar
of the source
distribution.
This file can usually also be found in the /usr/X11R6/lib/X11/etc
directory when Xorg is installed.
Building, and installing the driver is relatively straight forward. Please read
its accompanying README file.
xinit
command would look like
so:
xinit -- vt00
If you have made the virtual terminal devices you do not need to specify the VT
to run the Xserver on.
/usr/X11R6/lib:/usr/openwin/lib:/usr/dt/lib
.
Including /usr/X11R6/lib
in your LD_LIBRARY_PATH is probably not
necessary, however it doesn't hurt. :)Including /usr/openwin/lib
in the LD_LIBRARY_PATH is recommended
on older releases because some Sun supplied binaries were not compiled with LD_RUN_PATH set
properly at compile time.
Motif and CDE applications may require /usr/dt/lib
in your
LD_LIBRARY_PATH too.
/usr/X11R6/lib/X11/etc/XdmConf.svr4
into a temporary directory.
The README
file tells where the individual files need to be installed.
Be sure to read through each file and make any site-specific changes that you
need.